Chapter 2
Installation and Configuration
©
National Instruments Corporation
2-3
Figure 2-1.
Installing the SCXI-1104/C Module
To complete your SCXI-1104/C installation, follow the procedure in the
appropriate sections that follow.
Connecting the SCXI-1104/C to a DAQ Device for Multiplexed Scanning
in an SCXI Chassis
This configuration allows you to multiplex all 32 input channels of the
SCXI-1104/C into a single channel of your DAQ device. You need the
following items for this installation:
•
SCXI chassis with the SCXI modules installed
•
SCXI cable assembly, which consists of a cable adapter and a cable
•
An installed National Instruments DAQ device
•
1/4 in. flathead screwdriver
Consult your SCXI chassis documentation, other SCXI module
documentation, and DAQ device documentation for additional instructions
and warnings. Your SCXI-1104/C module and any other SCXI modules
1
SCXI Chassis Power Switch
2
SCXI Chassis Slots
3
SCXI Module Thumbscrews
2
®
MAINFRAME
SCXI
1
3
