![background image](http://html1.mh-extra.com/html/national-instruments/sc-205-series/sc-205-series_user-manual_3467418083.webp)
Chapter 9
SC-2057
9-2
©
National Instruments Corporation
Figure 9-1.
SC-2057 Parts Locator Diagram
SC-2057 Connection
Connect the SC-2057 to the VXI-DIO-128 via a SH96-96, available
separately. Make this connection with the VXI-DIO-128 powered off.
Connect one end of the SH96-96 to either of the 96-pin connectors, P1 or
P2, on the SC-2057 and connect the other end to one of the 96-pin
connectors on the VXI-DIO-128.
The VXI-DIO-128 has a 96-pin connector labeled OUTPUT. The digital
lines from this connector are digital outputs. The VXI-DIO-128 has a
96-pin connector labeled INPUT. The digital lines from this connector are
digital inputs.
1
To VXI-DIO-128
2
Jumper W1
3
To SC-206X, SCXI-116X, SSR Series, or ER-8/16
4
To SC-206X, SCXI-116X, SSR Series, or ER-8/16
5
Product Name
6
Assembly Number
7
+24 V, 0.5 A Source
8
+12 V, 0.5 A Source
9
+5 V, 1 A Source
10 Serial Number
1
10
9
8
7
6
5
4
3
2
Summary of Contents for SC-205 Series
Page 1: ...SC 2071...