Chapter 1
Introduction
1-4
©
National Instruments Corporation
❑
Your DAQ device
❑
Your computer
Detailed specifications for the SC-205
X
Series adapters are in Appendix A,
.
Unpacking
Your SC-205
X
adapter is shipped in an antistatic package to prevent
electrostatic damage to the adapter. Electrostatic discharge can damage
several components on the adapter. To avoid such damage in handling the
adapter, take the following precautions:
•
Ground yourself via a grounding strap or by holding a grounded object.
•
Touch the antistatic package to a metal part of your computer chassis
before removing the adapter from the package.
•
Remove the device from the package and inspect the adapter for loose
components or any other sign of damage. Notify National Instruments
if the device appears damaged in any way.
Do not
install a damaged
adapter into your computer.
Never
touch the exposed pins of connectors.
Software Programming Choices
The SC-205
X
Series adapters, except the SC-2056, are invisible to the host
computer and require no additional software beyond the software you are
using to control your DAQ device.
Optional Equipment
National Instruments offers a variety of products to use with your SC-205
X
Series adapter, including cables, connector blocks, rack-mount kits, and
other accessories.
For more specific information about these products, refer to your National
Instruments catalogue or call the office nearest you.
Summary of Contents for SC-2042-RTD
Page 1: ...SC 2042 RTD...