© National Instruments
|
A-1
A
Reference Carrier Board
Specifications and User
Guide
This appendix provides pinouts, connectivity information, and specifications for the reference
carrier board included with the sbRIO-9651 SOM development kit.
The reference carrier board provides the following:
•
A hardware environment for developing and evaluating designs that target the
sbRIO-9651 SOM.
•
Access to most of the onboard peripherals available on the sbRIO-9651 SOM, including
Ethernet, serial RS-232 and RS-485, USB Device, USB Host, SD card, and FPGA I/O.
•
Additional supported capability through five Pmod connectors on the breadboard circuit
prototyping area.
Note
Visit
ni.com
and search for
9651
for the reference carrier board schematic
and PCB gerber files.
Parts Locator Diagram and Block Diagram
Refer to the
NI sbRIO-9651 System on Module Development Kit Quick Start Guide
for the
reference carrier board parts locator diagram and hardware block diagram.
Specifications
The following specifications are typical and not guaranteed.
Note
Refer to the
NI sbRIO-9651 System on Module OEM Device Specifications
for complete specifications for each interface the sbRIO-9651 SOM supports. The
specifications listed in this section pertain only to the interfaces implemented on the
reference carrier board.