background image

RMC-8356 Installation Guide

|

© National Instruments

|

19

Waste Electrical and Electronic Equipment (WEEE)

EU Customers

At the end of the product life cycle, all products 

must

 be sent to a 

WEEE recycling center. For more information about WEEE recycling centers, 
National Instruments WEEE initiatives, and compliance with WEEE Directive 
2012/19/EC on Waste and Electronic Equipment, visit 

ni.com/environment/

weee

.

Battery Replacement and Disposal

Battery Directive

This device contains a long-life coin cell battery. If you need 

to replace it, use the Return Material Authorization (RMA) process or contact an 
authorized National Instruments service representative. For more information 
about compliance with the EU Battery Directive 2006/66/EC about Batteries 
and Accumulators and Waste Batteries and Accumulators, visit 

ni.com/

environment/batterydirective

.

Worldeated wide Support and Services

The NI website is your complete resource for technical support. At 

ni.com/support

 you have 

access to everything from troubleshooting and application development self-help resources to 
email and phone assistance from NI Application Engineers.

Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty, and 

other services.

Visit 

ni.com/register

 to register your NI product. Product registration facilitates technical 

support and ensures that you receive important information updates from NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the European 
Communities using the manufacturer’s declaration of conformity. This system affords the user 
protection for electromagnetic compatibility (EMC) and product safety. You can obtain the DoC 
for your product by visiting 

ni.com/certification

. If your product supports calibration, 

you can obtain the calibration certificate for your product at 

ni.com/calibration

.

NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 
78759-3504. NI also has offices located around the world. For telephone support in the United 
States, create your service request at 

ni.com/support

 or dial 1 866 ASK MYNI (275 6964). 

For telephone support outside the United States, visit the Worldwide Offices section of 

ni.com/niglobal

 to access the branch office websites, which provide up-to-date contact 

information, support phone numbers, email addresses, and current events.

Cd/Hg/Pb

⭥ᆀؑ᚟ӗ૱⊑ḃ᧗ࡦ㇑⨶࣎⌅˄ѝഭ

RoHS

˅

 

ѝഭᇒᡧ

  

National Instruments

ㅖਸѝഭ⭥ᆀؑ᚟ӗ૱ѝ䲀ࡦ֯⭘ḀӋᴹᇣ⢙䍘ᤷԔ

  

(RoHS)

DŽޣҾ

National Instruments

ѝഭ

RoHS

ਸ㿴ᙗؑ᚟ˈ䈧ⲫᖅ

ni.com/ 

environment/rohs_china

DŽ

(For information about China RoHS compliance,  

go to

 

ni.com/environment/rohs_china

.)

 

Summary of Contents for RMC-8356





















Reviews: