© National Instruments
|
2-17
User Access Level
This option is available when you set a supervisor password. Available options are:
•
Full Access
—You have full read and write access to the setup utility.
•
View Only
—You can access to the setup utility, but cannot change the fields.
•
Limited
—You can change only limited fields such as
Date
and
Time
.
•
No Access
—You do not have access to the setup utility.
Change User Password
Select this feature and press <Enter> to access the submenu, then type in a new user password.
Clear User Password
This option is available only if you set a user password.
Password Check
Available options are
Setup
and
Always
.
Boot Sector Virus Protection
When enabled, the AMI BOIS displays a warning when any program (or virus) issues a disk
format command or attempts to write to the hard disk drive boot sector. The options are
Enabled
and
Disabled
.
Boot Settings
Use the following options in this menu to configure boot settings.
Boot Device Priority
Use this option to specify the boot device priority sequence. The settings are
1st boot device
,
2nd boot device
,
3rd boot device
,
4th boot device
,
5th boot device
, and
Disabled
.
•
1st boot device
: First floppy drive
•
2nd boot device
: [USB: XXXXXXXXX]
•
3rd boot device
: [SATA: XXXXXXXXX]
•
4th boot device
: [Network: XXXXXXXXX]
•
5th boot device
: [Network: XXXXXXXXX]
Hard Disk Drives
Use this option to specify the hard drive priority sequence.
•
1st drive
: [SATA: XXXXXXXXXX]
•
2nd drive
: [SATA: XXXXXXXXXX]
