Figure 3.
Clearing the CMOS Contents
1
1. Push-Button Switch SW1
Upgrading System Memory
You can change the amount of installed RAM on the NI PXIe-8830mc by upgrading the
DDR3 SO-DIMMs. Complete the following steps to upgrade the RAM.
1.
Remove the NI PXIe-8830mc from the PXI Express chassis.
2.
Locate the DDR3 SO-DIMM module on the side of the processor module, as shown in
the figure.
3.
Remove the installed DDR3 SO-DIMM module, if necessary.
4.
Install the new DDR3 SO-DIMM module into the slot.
NI PXIe-8830mc System Memory Information
National Instruments offers the following types of SO-DIMMs for use with the
NI PXIe-8830mc processor module.
Note
National Instruments has tested and verified that the DDR3 SO-DIMMs we
sell work with the NI PXIe-8830mc processor module. We recommend you purchase
8
|
ni.com
|
NI PXImc Devices User Manual
