National Instruments PXIe-8830mc, User Manual

Page: 13 / 16

CE Compliance
This product meets the essential requirements of applicable European Directives, as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
To obtain product certifications and the DoC for this product, visit ni.com/certification , search
by model number or product line, and click the appropriate link in the Certification column.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the Minimize Our Environmental Impact
web page at ni.com/environment . This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers At the end of the product life cycle, all NI products must be
disposed of according to local laws and regulations. For more information about
how to recycle NI products in your region, visit
ni.com/environment/weee .
电子信息产品污染控制管理办法（中国
RoHS
）
中国客户
National Instruments 符合中国电子信息产品中限制使用某些有害物
质指令(
RoHS
)。关于
National Instruments
中国
RoHS
合规性信息，请登录
ni.com/environment/rohs_china
。( For information about China RoHS
compliance, go to
ni.com/environment/rohs_china
.
)
Appendix A: Front Panel Connector Pinouts
Ethernet
The following figure shows the location and pinouts for the Ethernet connector on the
NI PXIe-8830mc. The following table lists and describes the Ethernet connector signals.
AMP manufactures a mating connector, part number 554739-1.
NI PXImc Devices User Manual | © National Instruments | 13