Figure 1.
Module Installation
2
3
1
1. Chassis
2. Hardware Module
3. Ejector Handle in Downward (Unlatched) Position
9. Latch the module in place by pulling up on the ejector handle.
10. Secure the module front panel to the chassis using the front-panel mounting
screws.
Note
Tightening the top and bottom mounting screws increases
mechanical stability and also electrically connects the front panel to
the chassis, which can improve the signal quality and
electromagnetic performance.
11. Cover all empty slots using either filler panels (standard or EMC) or slot
blockers with filler panels, depending on your application.
Note
For more information about installing slot blockers and filler
panels, go to
.
12. Power on the chassis.
Related tasks:
■
Interconnecting the PXIe-5832 Modules
ni.com
10
PXIe-5832 Getting Started
