Other Equipment
There are several required items not included in your device kit that you need to install or
operate the NI 5672.
Required Items
•
A PXI/PXI Express chassis and chassis documentation. The NI PXIe-1085 chassis is one
available option for your device. For more information about compatible chassis options,
refer to
.
•
A PXI/PXI Express embedded controller or MXI controller system that meets the system
requirements specified in this guide and chassis documentation.
Optional Items
•
A 1 N · m standard SMA torque wrench (NI part number 780487-01).
Preparing the Environment
Ensure that the environment you are using the NI 5672 in meets the following specifications.
Operating ambient temperature
....................................................................
NI PXI-5610 upconverter
0 °C to 55 °C (Tested in accordance with
IEC 60068-2-1 and IEC 60068-2-2. Meets
MIL PRF-28800F Class 3 low temperature
limit and MIL PRF-28800F Class 2 high
temperature limit.)
....................................................................
NI PXIe-5442 AWG
0 °C to 55 °C operating in all National
Instruments PXI Express chassis.
............................................................................
Operating relative humidity
(IEC-60068-2-56)
10% to 90%, noncondensing
............................................................................
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient
temperature)
............................................................................
Pollution Degree
2
Indoor use only.
Caution
Clean the hardware with a soft, nonmetallic brush. Make sure that the
hardware is completely dry and free from contaminants before returning it to
service.
Note
Refer to the
NI PXIe-5672 Specifications
for complete
specifications.
NI PXIe-5672 Getting Started Guide
|
© National Instruments
|
5
