Other Equipment
There are several required items not included in your device kit that you need to operate the
PXIe-5668. Your application may require additional items not included in your kit to install or
operate your device.
•
A PXI Express chassis and chassis documentation. The PXIe-1085 chassis is one
available option for your device. For more information about compatible chassis options,
refer to
.
•
An embedded controller or MXI controller system that meets the system requirements
specified in this guide and chassis documentation.
Preparing the Environment
Ensure that the environment you are using the PXIe-5668 in meets the following
specifications.
Operating ambient temperature
(IEC 60068-2-1, IEC 60068-2-2)
0 °C to 55 °C
Operating relative humidity
(IEC 60068-2-56)
10% to 90%, noncondensing
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient
temperature)
Pollution Degree
2
Indoor use only.
Notice
Clean the hardware with a soft, nonmetallic brush or lint free cloth. Make
sure that the hardware is completely dry and free from contaminants before returning
it to service.
Note
Refer to the
PXIe-5668 Specifications
for complete
specifications.
Choosing and Installing the Software
Software Options
NI provides several software options for the PXIe-5668—NI-RFmx, the NI-RFSA instrument
driver software, and the NI-RFSA Soft Front Panel (SFP).
PXIe-5668 Getting Started Guide
|
© National Instruments
|
5
