background image

Where to Go Next

Refer to the following figure for information about other product tasks and associated
resources for those tasks.

custom applications within

an application programming 

interface (API).

NI-VNA Examples* 

NI Vector Network
Analyzers Help* 

NI-VNA Soft Front Panel 
NI-VNA Instrument Driver 

about hardware features 

or review device  

specifications.

more about your products through 

ni.com.

 

NI PXIe-5632
Specifications* 

NI Vector Network
Analyzers Help* 

the application development 

environment (ADE)

 for your application.

Learn LabVIEW Basics

 

Getting Started with
LabWindows/CVI 

Support

ni.com/support

*This item is also installed with the driver software.

EXPLORE

LEARN

CREATE

DISCOVER

RF Solutions

ni.com/rf

Services

ni.com/services

NI Community

ni.com/community

Located at 

ni.com/gettingstarted

Located at 

ni.com/manuals

Located using the NI Example Finder

Tip

 

The 

NI Vector Network Analyzers Help

 is an HTML version of a traditional

user manual that includes detailed information about RF fundamentals, device
features, and programming with NI-VNA.

Worldwide Support and Services

The National Instruments website is your complete resource for technical support. At 

ni.com/

support

, you have access to everything from troubleshooting and application development

self-help resources to email and phone assistance from NI Application Engineers.

Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty, and

other services.

18

  | 

ni.com

  | 

NI PXIe-5632 Getting Started Guide

Summary of Contents for PXIe-5632





















Reviews: