28
|
ni.com
|
NI PXIe-4339 and RM-4339 User Guide and Terminal Block Specifications
Caution
Do
not
pull the front panel to remove the module. Doing so may cause
module components to come into contact with adjacent modules, causing damage to
the modules.
3.
Pull the captive screws to unseat the module and slowly slide the module along the guides.
4.
Replace the filler panel in the empty slot.
5.
Store the module in an antistatic protective bag.
Figure 9.
Removing NI SC Express Modules
Create a Simulated Device
To run examples without the hardware installed, use an NI-DAQmx simulated device. To create
a simulated device in MAX:
1.
Launch MAX.
2.
Right-click
Devices and Interfaces»Create New
.
3.
From the dialog, select
Simulated NI-DAQmx Device or Modular Instrument
.
4.
Type
4339
in the text box at the top of the window.
5.
Select the device from the list provided.
6.
Click
OK
.
7.
To simulate an accessory:
a.
Right-click the simulated NI PXIe-4339>>Configure...
b.
Select the Accessory from the Connector 0 drop down.
c.
Click
OK
.
1
Captive Screws (Use to remove modules.)
2
Front Panel (Do not use to remove modules.)
NI P
XIe-
10
62Q
CO
OLING
CL
EARA
NCE
AND
FAN
FILT
ER
MA
INTE
NA
NCE
RE
QUI
RED
.
S
EE MA
NUA
L.
2
1
