Appendix C
Adaptec SATA RAID Utility for Intel ICH7R
©
National Instruments Corporation
C-3
Typical, Custom, and Compact Installations
You can select from these setup options:
•
Typical (default)
—Supports local and remote management; however,
Adaptec SNMP is not included.
•
Custom
—For expert users. Primarily used on Web servers or to ensure
SNMP and Notifier are available for a managed system. You can select
from these components:
–
Managed System Components
—If you choose this selection
only, the installation is the same as a compact installation.
–
Adaptec Web Server
—Installs components allowing managed
systems to communicate with Web browsers.
–
Adaptec Storage Manager Notifier
—Installs messaging,
including email and broadcaster capabilities.
–
Adaptec SNMP
—Installs components used by SNMP-based
applications. Requires Microsoft SNMP agents. Not included in a
typical installation.
•
Compact
—Installs only the components required on a remotely
managed system. Refer to
Managed System Components
.
Note
When you perform a typical or compact installation, components needed for
communication and remote management are installed automatically.
Installing Adaptec Storage Manager
Note
When installing on a FAT 32 file system, the folder being installed is automatically
hidden.
Complete the following steps to install Adaptec Storage Manager:
1.
Verify that a supported browser is installed. Refer to
for details.
2.
Insert the application CD and wait for the Autorun executable to start
the installation. If the executable does not run, browse the CD and click
Autorun
.
3.
Click
Adaptec Utilities
.
4.
Click
Install Adaptec Storage Manager
.
5.
Click
Next
in the Install Shield window.
