National Instruments PXI-8150B, User Manual

Page: 73 / 78

© National Instruments Corporation I-1 PXI-8150B Series User Manual
Index
A
Acrobat (online) documentation, xi
active keyboard port (figure), 3-6
active mouse port (figure), 3-6
adding RAM, A-3
address map, I/O (table), B-3 to B-4
Adobe Acrobat, xi
B
BIOS, 4-1
See also CMOS.
checking settings, E-2
default settings, 4-1
entering setup, 4-1
logic block, 2-3
updating, 4-1
bulletin board support, F-1
C
chassis support, 1-7
chip set block, 2-2
CMOS, E-2
See also BIOS.
configuration, 3-4
default jumper and switch settings
(table), 3-1
setting back to default, E-3
switch settings (figure), 3-4
COM1 and COM2, D-7
connector signals (table), D-8
connectors location and pinout (figure), D-7
common questions and answers, E-1 to E-3
CompactPCI specification, 1-3
configuration, 3-1 to 3-8
See also installation.
checking BIOS settings, E-2
CMOS, 3-4
common questions, E-1 to E-3
CPU board parts locator diagram, 3-3
default settings, 3-1 to 3-3
electrostatic discharge damage
(caution), 3-1
Ethernet power-on defaults, 3-5
installed system RAM, 3-4
keyboard and mouse, 3-6
LCD output with PXI-1020 chassis, 3-5
LCD resolution, 3-6
onboard video, 3-8
parts locator diagram, 3-3
serial IRQ, INTP, and INTS, 3-7
connectors
COM1 and COM2 connector and signals,
D-7 to D-8
Ethernet connector and signals, D-6 to D-7
GPIB connector and signals, D-9 to D-11
keyboard and mouse connector and signals,
D-4
overview, 1-5
parallel port connector and signals, D-9
peripheral expansion overview (table), 1-6
PXI connectors
location and pinout (figure), D-12
P1 connector pinouts (table), D-14
P2 connector pinouts (table), D-13
Universal Serial Bus (USB) connector and
signals (table), D-11
VGA connector and signals, D-5 to D-6
CPU
parts locator diagram, 3-3
processor choices, 1-4