National Instruments PXI-665 Series Installation Manual Download Page 1

Page: 1 / 4

November 2003
323613A-01

NI PXI-665

Installation Guide

This guide contains instructions for installing your NI PXI-665

controller and

NI-Sync software.

Installing the Software

Note

Be sure to install the driver software

before

installing the

NI PXI-665

hardware.

Complete the following steps to install the software:

1. Place the NI-Sync CD in your CD-ROM drive.

2. Click

Install NI-Sync

in the window that appears. If no window appears,

run the

setup.exe

program on the CD.

3. Follow the prompts to install the NI-Sync driver.

•

Select

Typical

to install the driver and support for the development

environments present on your computer.

•

Select

Custom

to manually select which components should be installed.

4. Reboot the computer when prompted to do so, or shut down the computer and

install the hardware.

Summary of Contents for PXI-665 Series

Page 1: ...install the software 1 Place the NI Sync CD in your CD ROM drive 2 Click Install NI Sync in the window that appears If no window appears run the setup exe program on the CD 3 Follow the prompts to ins...

Page 2: ...er panel for the PXI slot you chose in step 2 4 Ground yourself using a grounding strap or by holding a grounded object Follow the ESD protection precautions described in the Unpacking section of Chap...

Page 3: ...e first boot following the software and hardware installation of the NI PXI 665x Windows detects the device and the NI Sync driver will initiate communication with it A green access LED on the front p...

Page 4: ...any names mentioned herein are trademarks or trade names of their respective companies For patents covering National Instruments products refer to the appropriate location Help Patents in your softwar...