Chapter 3 Configuration
Serial for Windows NT
3-2
©
National Instruments Corporation
2.
Select the port you are interested in.
3.
Click on the Settings button to view or configure the port settings.
Refer to the next section, General Port Settings, for more
information.
4.
Click on the Resources button in the General Port Settings dialog
box to view or configure the resources for the port. Refer to the
Resource Settings section, later in this chapter, for more information.
5.
Click on Delete to remove the port.
6.
Click on Add to configure resources for a new PCMCIA card.
General Port Settings
This section describes the options you can set in the General Port
Settings dialog box, shown in Figure 3-2.
Figure 3-2.
General Port Settings Dialog Box
COM Port Number
You can use the COM Port Number control to change the COMx name
of the port selected.
