Chapter 4
Measurement Studio Integrated Tools and Features
Measurement Studio User Manual
4-6
ni.com
When you exit the wizard, the wizard adds or removes the appropriate
references to or from the project, thus adding or removing the functionality
associated with the class library.
Figure 4-2.
Measurement Studio Add/Remove Class Libraries Wizard for
Visual Studio 2005
Tip
For more information about using the Add/Remove .NET Class Libraries wizard to
add or remove Measurement Studio .NET class libraries, refer to the
Adding or Removing
Measurement Studio .NET Class Libraries
section in the
NI Measurement Studio Help
.
Creating a Measurement Studio NI-DAQmx Application
To create a Measurement Studio NI-DAQmx application, use the DAQ
Assistant. The DAQ Assistant integrates into Visual Studio as a code
designer. Use the Add New Item wizard to add an NI-DAQmx task to your
project, and use the DAQ Assistant user interface, as shown in Figure 4-3,
to interactively create and configure the NI-DAQmx task. The DAQ
Assistant automatically generates a Visual Basic .NET, Visual C#, or
Visual C++ (Visual Studio 2005 only) class that includes the functionality
you configure in the user interface.