background image

©

 National Instruments Corporation

13

Getting Started with the NI CVS-1450 Series 

IEEE 1394

Number of ports .....................................................3

Camera interface ....................................................IEEE 1394a

Speed......................................................................100, 200, or 400 Mbps

Available bus power ...............................................Refer to th

Power Requirements

 section

Physical Characteristics

Dimensions ............................................................10.2 cm 

×

 12.7 cm 

×

 6.4 cm 

(4 in. 

×

 5 in. 

×

 2.5 in.)

Weight ....................................................................1 kg (2.2 lb)

Refer to Appendix B, 

Mounting Information

, of the 

NI CVS-1450 Series User Manual

 for dimensional 

drawings of the NI CVS-1450 device.

Environmental

The NI CVS-1450 device is intended for indoor use only.

Operating temperature

Vertical mounting position.............................0 to 55 °C

All other positions..........................................0 to 45 °C

Storage temperature ...............................................–20 to 85 °C 

Humidity ................................................................10 to 90% RH, noncondensing

Pollution Degree ....................................................2

Operating shock (IEC 68-2-27) .............................50 g, 6 ms half sine, 3 shocks per side; 

30 g 11 ms half sine, 3 shocks per side

Operating vibration

Random (IEC 60068-2-34) ............................10 to 500 Hz, 5 G

rms

Swept Sine (IEC 60068-2-6)..........................10 to 500 Hz, 5 g

Approved at altitudes up to 2,000 m.

Safety

The NI CVS-1450 device meets the requirements of the following standards for safety and electrical 
equipment for measurement, control, and laboratory use:

EN 61010-1, IEC 61010-1

UL 61010-1

CAN/CSA-C22.2 No. 61010-1

Note

For UL and other safety certifications, refer to the product label or visit 

ni.com/

certification

, search by model number or product line, and click the appropriate link the 

Certification column.

Summary of Contents for NI Vision CVS-1450 Series

















Reviews: