©
National Instruments Corporation
7
NI TB-2634 Installation Instructions
Accessories
Refer to Table 1 for vendors of compatible sockets.
Note
The ribbon cable accessories listed in Table 1 limit the maximum current you can
route to 1.5 A.
Compliance and Certifications
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or visit
ni.com/
certification
, search by model number or product line, and click the appropriate link
in the Certification column.
Electromagnetic Compatibility
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note
For EMC compliance, operate this device with shielded cables.
Table 1.
Third-Party Accessories for the NI TB-2634
Accessory
Manufacturer
Manufacturer
Part Number
0.1 in. 2
×
16 low-profile ribbon cable socket
Samtec
HCSD-16-01
0.1 in. 2
×
16 ribbon cable assembly
Samtec
IDSD-16 series