![background image](http://html1.mh-extra.com/html/national-instruments/ni-pxie-5663/ni-pxie-5663_getting-started-manual_3413101006.webp)
If the installation window does not appear, navigate to the drive, double-click it, and
double-click
autorun.exe
.
3. Follow the instructions in the installation prompts.
Note
Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
4. When the installer completes, select
Restart
in the dialog box that prompts you to restart,
shut down, or restart later.
Installing the NI 5663
Caution
To prevent damage to the device caused by ESD or contamination, handle
the device using the edges or the metal bracket.
You must install NI-RFSA before installing the hardware.
Before you install the hardware, refer to the guidelines in the
Maintain Forced-Air Cooling
Note to Users
included with the module to ensure that the device can cool itself effectively.
To use the included cables, you must install the NI 5622 IF digitizer module immediately to
the right of the NI 5601 RF downconverter module, and you must install the NI 5652 LO
source module immediately to the left of the NI 5601 RF downconverter module.
1. Ensure the AC power source is connected to the chassis before installing the modules.
The AC power cord grounds the chassis and protects it from electrical damage while you
install the modules.
2. Power off the chassis.
3. Inspect the slot pins on the chassis backplane for any bends or damage prior to
installation. Do not install a module if the backplane is damaged.
4. Remove the black plastic connectors from all the captive screws on the module front
panel.
5. Identify a supported slot in the chassis. The following figure shows the symbols that
indicate the slot types.
Figure 2.
Chassis Compatibility Symbols
NI PXIe-1062Q
1
2
3
4
5
1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot
NI 5601 and NI 5622 modules can be placed in PXI Express peripheral slots or PXI
Express Hybrid peripheral slots, and the NI 5652 module can be placed in PXI peripheral
NI PXIe-5663 Getting Started Guide
|
© National Instruments
|
5
Summary of Contents for NI PXIe-5663
Page 1: ...PXIe 5663...