background image

©

 2002 National Instruments Corp. All rights reserved.

National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation. Product and company 
names mentioned herein are trademarks or trade names of their respective companies. For patents covering 
National Instruments products, refer to the appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file 

on your CD, or 

ni.com/patents

.

October 2002

323398B-01

NI PXI-5621 S

PECIFICATIONS

High-Speed Digitizer

The NI PXI-5621 is a DC-coupled 64 MS/s 14-bit high-speed digitizer. 
Except for its DC coupling, the PXI-5621 is functionally identical to the 
PXI-5620. Refer to the 

NI PXI-562x User Manual

 for instructions on 

installing and using your NI PXI-5621. 

The NI PXI-5621 specifications are warranted at 0–50

°

C ambient unless 

otherwise specified, and include a 10 minute warm-up time from ambient 
conditions. 

General Specifications

Number of channels ............................... 1

Resolution .............................................. 14 bits

Sample rate range................................... 1 kS/s to 64 MS/s

Onboard memory

Not using DDC ............................... 32 MS

Using DDC (complex data) ............ 16 MS

Input

Signal level

Nominal .......................................... 0 dBm (±0.316 V

p

)

Full-scale......................................... +10 dBm (±1.000 V

p

)

Max with dither enabled ................. +8 dBm (±0.794 V

p

)

Non-operating 

Max input level ........................ +20 dBm (±3.16 V

p

)

Max DC input voltage ............. ±3.0 V

Input impedance ..................................... 50 

Ω 

nominal

Coupling................................................. DC

ni.com

Summary of Contents for NI PXI-5621










Reviews: