Chapter 7
LED Indicators
NI 177x Smart Camera User Manual
7-2
ni.com
Device Initialization
While the NI 177x Smart Camera initializes, the Power and Status LED
indicators exhibit behavior described in the following table:
If both the Power and Status indicators continuously display solid red, your
device has experienced a critical error and you should contact NI support.
Power Indicator
The Power indicator provides information about the power supply. The
Power indicator is green while the camera is properly powered on. When
no power is being supplied to the NI Smart Camera, the Power indicator is
unlit. When power is first applied to the device, the Power indicator flashes
red for one second while internal systems power up. If the Power indicator
stays red for longer than one second, it indicates that the voltage is out of
range.
Status Indicator
The Status indicator provides information about the status of the camera.
The following table describes the behavior of the Status indicator:
Table 7-1.
LED Indicator Behavior during Device Initialization
Indicator Name
LED Behavior
Power
Red for 0.5 seconds then solid green
Status
Red for 0.5 seconds then off
Table 7-2.
Status LED Indicator Behavior
LED
Color
Description
Off
The camera has no power or software is not installed.
Red
The camera is initializing.
Orange
Software initialized successfully and is ready for use.
Green
The camera is acquiring an image.
Summary of Contents for NI ISC-1772C
Page 1: ...ISC 1772C...