background image

©

 National Instruments Corporation

17

Getting Started with the NI EVS-1464RT

Battery Replacement and Disposal

Battery Directive

This device contains a long-life coin cell battery. If you need to replace it, use the 

Return Material Authorization (RMA) process or contact an authorized National Instruments service 
representative. For more information about compliance with the EU Battery Directive 2006/66/EC 
about Batteries and Accumulators and Waste Batteries and Accumulators, visit 

ni.com/

environment/batterydirective

.

Where to Go from Here

The following documents and resources contain information you may find helpful as you set up and use 
the NI EVS-1464RT in an application.

Refer to the 

NI EVS-1464 Series User Manual

 for detailed information about:

Device and I/O specifications

Mounting requirements

Answers to common questions about network, firewall, hardware, software, and power issues

Additional Resources for Vision Builder for Automated Inspection Users

Refer to the 

NI Vision Builder for Automated Inspection Tutorial

 to learn how to perform basic machine 

vision techniques using Vision Builder AI. You can access the 

NI Vision Builder for Automated 

Inspection Tutorial

 and other documentation by selecting 

Start»All Programs»National 

Instruments»Vision Builder AI»Documentation

. You can also access context help within 

Vision Builder AI by clicking the 

Show Context Help

 button on the Vision Builder AI toolbar.

Examples of common Vision Builder AI inspections are installed to the 

<Vision Builder AI>\

Examples

 directory.

Visit the NI Developer Zone at 

ni.com/zone

 for the latest example programs, tutorials, technical 

presentations, and a community area where you can share ideas, questions, and source code with 
developers around the world.

Additional Resources for LabVIEW Users

Documentation for LabVIEW and the LabVIEW Real-Time Module is available from the 

Help

 menu 

on the LabVIEW toolbar. You can access documentation for the NI Vision Development Module by 
selecting 

Start»All Programs»National Instruments»Vision»Documentation»NI Vision

.

Documentation for the NI-IMAQdx driver software is available by selecting 

Start»All Programs»

National Instruments»Vision»Documentation»NI-IMAQdx

.

Documentation for the NI-IMAQ I/O driver software is available by selecting 

Start»All Programs»

National Instruments»Vision»Documentation»NI-IMAQ IO

.

Documentation for the MAX configuration software is available from the 

Help

 menu on the MAX 

toolbar. Specific information about using MAX with NI Vision hardware is available by selecting 

Help»Help Topics»NI Vision»NI-IMAQdx

.

Cd/Hg/P

b

⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ ˄Ё೑

RoHS

˅

Ё೑ᅶ᠋

National Instruments

ヺড়Ё೑⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ

 (RoHS)

DŽ

݇Ѣ

National Instruments

Ё೑

RoHS

ড়㾘ᗻֵᙃˈ䇋ⱏᔩ

ni.com/environment/rohs_china

DŽ

(For information about China RoHS compliance, go to 

ni.com/environment/rohs_china

.)

Summary of Contents for NI EVS-1464RT




















Reviews: