National Instruments NI EDIDS-2400 Series, User Manual, Page: 255 / 314

NI EDIDS-2400 Series User Manual | © National Instruments | 255
4.23 XNET CAN Setup Window
The purpose of the XNET CAN Setup window is to configure the operation of the NI 9862 XNET CAN module
to communicate data to and from external devices that are on the same network. To use the DI Driver System
XNET CAN feature, you must download NI-XNET driver version 15.0 or later. It is freely downloadable from http://
sine.ni.com/psp/app/doc/p/id/psp-903/lang/en.
CAN_Run
Tip Strip: Commences communication to external CAN device(s)
Detail: If the NI 9862 XNET CAN module is externally powered in its assigned slot and the variables are
appropriately mapped to the CAN signal list, CAN communication between the DI Driver system and external CAN
device(s) will begin as soon as the CAN Init button is pressed.