NI CVS-1458RT Getting Started Guide
|
© National Instruments
|
5
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) as stated in the product specifications. These requirements
and limits are designed to provide reasonable protection against harmful interference when the
product is operated in its intended operational electromagnetic environment.
This product is intended for use in industrial locations. There is no guarantee that harmful
interference will not occur in a particular installation, when the product is connected to a test
object, or if the product is used in residential areas. To minimize the potential for the product to
cause interference to radio and television reception or to experience unacceptable performance
degradation, install and use this product in strict accordance with the instructions in the product
documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Installing the Software
Before using the NI CVS-1458RT, you must install the application software and device drivers
on the development computer. National Instruments provides two options for developing
machine vision applications.
•
NI Vision Builder AI
—Interactive, menu-driven configuration software for developing,
benchmarking, and deploying machine vision applications.
•
NI Vision Development Module
—Programming library for developing machine vision
and scientific imaging applications. The NI Vision Development Module requires
LabVIEW, LabVIEW Real-Time, and NI-IMAQdx driver software.
Installing Vision Builder AI
Install Vision Builder AI from the Vision Builder AI installation media. Refer to the
NI Vision
Builder for Automated Inspection Readme
for installation instructions.
After installation, documentation for Vision Builder AI is available by selecting
Start»
All Programs»National Instruments»Vision Builder AI»Documentation
.
Vision Builder AI does not require additional software. Proceed to