12
|
ni.com
|
NI CVS-1458RT Getting Started Guide
Configuring the Device in NI Vision Builder AI
Complete the following steps to configure the device in Vision Builder AI.
1. Launch Vision Builder AI by navigating to
Start»All Programs»National Instruments»
Vision Builder AI
.
2. Select the NI CVS-1458RT from the list of available targets.
3. Select the
Configure Target
icon.
4. Complete the configuration wizard. At step 3, select
Update Target Software
to install
Vision Builder AI on the device.
Configuring the Device in NI MAX
Complete the following steps to configure the device in MAX.
1. Launch MAX by navigating to
Start»All Programs»National Instruments»NI MAX
or
by double-clicking the NI MAX desktop icon.
2. In the Configuration pane, expand
Remote Systems
to see a list of devices on the same
subnet.
3. Locate and expand the NI CVS-1458RT. The default name for each device is
NI-CVS-1458RT-XXXXXXXX
, where
XXXXXXXX
is the eight digit serial number.
4. Right-click
Software
and select
Add/Remove Software
.
5. Select
NI-IMAQdx
,
NI Vision-RIO
,
NI Vision RT
,
LabVIEW Real-Time
, and
NI-RIO
.
Some features will automatically select required dependencies.
6. Complete the installation wizard.
Acquiring an Image
To ensure the NI CVS-1458RT is functioning properly, acquire a test image.
Acquiring an Image in Vision Builder AI
Complete the following steps to acquire an image in Vision Builder AI.
1. Launch Vision Builder AI.
2. Select the NI CVS-1458RT from the list of available targets.
3. In the Configure Inspection section, select
New Inspection from Template
.
4. Select
Acquire Image Template
from the Compact Vision System tree.
5. Click the
Run Inspection Once
icon to acquire an image.
Acquiring an Image in MAX
Complete the following steps to acquire an image in MAX.
1. Launch MAX.
2. In the Configuration Pane, expand
Remote Systems
to see a list of devices on the same
subnet.