12
|
ni.com
|
NI 9752 User Manual
Custom Configuration
Visit
ni.com/info
and enter Info Code
ADCOMBO
for more information about custom
configuration.
Physical Specifications and Characteristics
Weight ...............................................................145 g
Maximum Altitude............................................2000 m
Operating Temperature .....................................-40 °C to 70 °C
Maximum Ambient Temperature......................70 °C
Operating Humidity ..........................................10% to 90% RH, noncondensing
Pollution Degree ...............................................2
Ingress Protection .............................................IP40
For indoor use only.
If you need to clean the module, wipe it with a dry towel.
Safety Guidelines
Caution
Do not operate this module in a manner not specified in these operating
instructions. Do not exceed the 60VDC rating. Product misuse can result in a hazard.
You can compromise the safety protection built into the product if the product is
damaged in any way. If the product is damaged, return it to National Instruments for
repair.
Compliance and Certifications
Safety
This product meets the requirements of the following standards of safety for electrical equipment
for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
•
EN 61326-1 (IEC 61326-1): Class A emissions; Industrial immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions