Before You Begin
Read the NI-9401 Safety, Environmental, and Regulatory Information and
complete the software and hardware installation procedures in your chassis
documentation.
Safety Guidelines
Caution
Observe all instructions and cautions in the user documentation.
Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention
Suivez toutes les instructions et respectez toutes les mises
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.
Safety Voltages
Connect only voltages that are within the following limits:
Maximum voltage
Channel-to-COM
±30 V maximum on one channel at a time, Measurement Category I
Isolation voltages
Channel-to-channel
None
Channel-to-earth ground
Continuous
60 V DC, Measurement Category I
Withstand
1,000 V RMS, verified by a 5 s dielectric withstand test
© National Instruments
3
NI-9401 Getting Started
