Overview
This document explains how to connect to the NI-9264. In this document, the
NI-9264 with spring terminal and the NI-9264 with DSUB are referred to inclusively
as the NI-9264.
Note
Before you begin, read the NI-9264 Safety, Environmental, and
Regulatory Information document on
and complete the
software and hardware installation procedures in your chassis
documentation.
Note
The guidelines in this document are specific to the NI-9264. The
other components in the system might not meet the same safety ratings.
Refer to the documentation for each component in the system to
determine the safety and EMC ratings for the entire system.
Safety Guidelines
Caution
Observe all instructions and cautions in the user documentation.
Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention
Suivez toutes les instructions et respectez toutes les mises
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.
Safety Guidelines for Hazardous Voltages
You can connect hazardous voltages only to the NI-9264 with spring terminal. Do not
connect hazardous voltages to the NI-9264 with DSUB.
© National Instruments
3
NI-9264 Getting Started
