2.
Press down firmly to compress the spring until the clip locks in place on the DIN rail.
Caution
Ensure that no C Series modules are in the NI 9149 before removing it
from the DIN rail.
Mounting the Device on a Rack
You can use the following rack mount kits to mount the NI 9149 and other DIN rail-mountable
equipment on a standard 482.6 mm (19 in.) rack.
•
NI Sliding Rack-Mounting Kit, 779102-01
•
NI Rack-Mounting Kit, 781989-01
Note
You must use the NI DIN rail mounting kit, 779018-01, in addition to a rack-
mounting kit.
Mounting the Device on a Desktop
You can use the NI desktop mounting kit to mount the NI 9149 on a desktop.
What to Use
•
NI 9149
•
Screwdriver, Phillips #2
•
NI desktop mounting kit, 779473-01
–
Desktop mounting brackets (x2)
What to Do
Complete the following steps to mount the NI 9149 on a desktop.
1.
Align the brackets with the mounting holes on the ends of the NI 9149.
2.
Use the screwdriver to tighten the captive screws on the end of the brackets.
Worldwide Support and Services
The NI website is your complete resource for technical support. At
, you have
access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.
Visit
for NI Factory Installation Services, repairs, extended warranty, and
other services.
Visit
to register your NI product. Product registration facilitates technical
support and ensures that you receive important information updates from NI.
A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This system
18
|
ni.com
|
NI 9149 User Manual