background image

NI 5782R User Manual and 
Specifications

The NI 5782 is an analog dual-input, dual-ouput, intermediate-frequency (IF) transceiver 
adapter module designed to work with your NI FlexRIO

 FPGA module. The NI 5782 features 

two analog input (AI) channels with 14-bit sample rates of up to 250 MS/s. The NI 5782 also 
has two analog output (AO) channels with 16-bit sample rates of up to 500 MS/s when using 
both AO channels, or up to 1 GS/s when using only one AO channel.

This document contains signal information and specifications for the NI 5782R, which is 
composed of an NI FlexRIO FPGA module and the NI 5782 adapter module. This document 
also contains tutorial sections that demonstrate how to acquire data using a LabVIEW FPGA 
example VI and how to create and run your own LabVIEW project with the NI 5782R.

Note

NI 5782R

 refers to the combination of your NI 5782 adapter module and your 

NI FlexRIO FPGA module. 

NI 5782

 refers to your NI 5782 adapter module only.

Caution

The protection provided by the NI 5782R can be impaired if it is used in 

a manner not described in this document.

Contents

Electromagnetic Compatibility Guidelines .............................................................................. 2
How to Use Your NI FlexRIO Documentation Set.................................................................. 3
Front Panel and Connector Pinouts .......................................................................................... 4
Block Diagram.......................................................................................................................... 7
NI 5782 Component-Level Intellectual Property (CLIP)......................................................... 8
Connecting Cables.................................................................................................................... 10
Clocking.................................................................................................................................... 10
Using Your NI 5782R with a LabVIEW FPGA Example VI .................................................. 11
Creating a LabVIEW Project and Running a VI on an FPGA Target...................................... 13
Appendix A: Specifications...................................................................................................... 16
Appendix B: Installing EMI Controls ...................................................................................... 34
Where to Go for Support .......................................................................................................... 36

Summary of Contents for NI 5782R





































Reviews: