National Instruments NI 5412, Specifications

Page: 2 / 26

NI 5412 Specifications 2 ni.com
CH 0
(Channel 0 Analog Output, Front Panel Connector)
Table 1.
Specification Value Comments
Number of
Channels 1 —
Connector SMB (jack) —
Output Voltage Characteristics
Output Paths The software-selectable Main Output Path setting provides
full-scale voltages from 12.00 V
pk-pk
to 5.64 mV
pk-pk
into a
50
Ω
load. NI-FGEN uses either the Low-Gain Amplifier or
the High-Gain Amplifier when the Main Output Path is
selected, depending on the Gain attribute.
—
DAC
Resolution 14 bits —
Amplitude and Offset
Amplitude
Range
Path Load
Amplitude (V
pk-pk
) 1. Amplitude
values assume
the full scale
of the DAC is
utilized. If an
amplitude
smaller than
the minimum
value is
desired, then
waveforms less
than full scale
of the DAC can
be used.
Minimum Value Maximum Value
Low-
Gain
Amplifier
50
Ω
0.00564 2.00
1 k
Ω
0.0107 3.81
Open 0.0113 4.00
High-
Gain
Amplifier
50
Ω
0.0338 12.0
1 k
Ω
0.0644 22.9
Open 0.0676 24.0
Amplitude
Resolution 3 digits —
Offset Range Span of ±25% of Amplitude Range with increments
<0.0014% of Amplitude Range. —