background image

©

 National Instruments Corporation

B-1

NI PCI-1410 User Manual

B

Technical Support and 
Professional Services

Visit the following sections of the National Instruments Web site at 

ni.com

 for technical support and professional services:

Support

—Online technical support resources at 

ni.com/support

 

include the following:

Self-Help Resources

—For answers and solutions, visit the 

award-winning National Instruments Web site for software drivers 
and updates, a searchable KnowledgeBase, product manuals, 
step-by-step troubleshooting wizards, thousands of example 
programs, tutorials, application notes, instrument drivers, and 
so on.

Free Technical Support

—All registered users receive free Basic 

Service, which includes access to hundreds of Application 
Engineers worldwide in the NI Discussion Forums at 

ni.com/forums

. National Instruments Application Engineers 

make sure every question receives an answer.

For information about other technical support options in your 
area, visit 

ni.com/services

 or contact your local office at 

ni.com/contact

Training and Certification

—Visit 

ni.com/training

 for 

self-paced training, eLearning virtual classrooms, interactive CDs, 
and Certification program information. You also can register for 
instructor-led, hands-on courses at locations around the world.

System Integration

—If you have time constraints, limited in-house 

technical resources, or other project challenges, National Instruments 
Alliance Partner members can help. To learn more, call your local 
NI office or visit 

ni.com/alliance

.

Declaration of Conformity (DoC)

—A DoC is our claim of 

compliance with the Council of the European Communities using 
the manufacturer’s declaration of conformity. This system affords 
the user protection for electronic compatibility (EMC) and product 
safety. You can obtain the DoC for your product by visiting 

ni.com/certification

.

Summary of Contents for Monochrome Image Acquisition Device NI 1410



































Reviews: