![background image](http://html1.mh-extra.com/html/national-instruments/mon-10467/mon-10467_user-manual_3459089012.webp)
Table 1. Signal Descriptions
Terminal
Signal
Description
0...11
AI+
Positive input of the analog input channel
0...11
AI-
Negative input of the analog input channel
0...11
Chassis ground
You can connect ground-referenced or floating signal sources to the MON-10467. Each analog
input channel has a 3-pin connector to which you can connect a signal source. The AI+
terminal accepts the positive input signal and provides the IEPE excitation when enabled. The
AI- terminal provides the excitation return path and connects to the AI ground reference. The
chassis ground terminal provides a direct connection to the MON-10467 enclosure to which
the input signal cable shield or drain wire can be connected.
Notice
Refer to the
MON-10467 Specifications
the devices you connect to the MON-10467 are compatible with the device
specifications.
24 V DC Power Bus Terminals Pinout
Note
MON-10467 (AC) and MON-10467 (DC) only.
V
C
Table 2. Terminal Descriptions
Terminal
Description
V
24 V DC supply input
C
0 V supply return
Use only one V and C terminal to power the device. You can use the other terminals to bus
power to accessories such as proximity probe drivers. Refer to the
section for more information on using proximity probe drivers and
electronic accessories with this device.
12
|
ni.com
|
MON-10467 User Guide