![background image](http://html1.mh-extra.com/html/national-instruments/isc-1780/isc-1780_user-manual_3398910010.webp)
Mounting the ISC-178x
The ISC-178x must be mounted to a support using the provided mounting holes before
operating.
Note
The acceptable bend radius for all connected cables is ten times (10x) the
cable diameter.
The following figures provide dimensional drawings for the ISC-178x.
Figure 4.
Front View with Dimensions
42.00 mm
(1.654 in.)
21.00 mm
(.827 in.)
16.50 mm
(.650 in.)
61.00 mm
(2.402 in.)
61.00 mm
(2.402 in.)
75.00 mm
(2.953 in.)
7.00 mm
(.276 in.)
7.00 mm
(.276 in.)
37.50 mm
(1.476 in.)
37.50
mm
(1.476
in.)
M4X0.7 – 6H
3.50
mm (0.138 in.)
75.00 mm
(2.953 in.)
ISC-178x User Manual
|
© National Instruments
|
9
Summary of Contents for ISC-1780
Page 1: ...ISC 1780...