© National Instruments
|
A-1
A
Specifications
The following specifications apply to the NI 1722/1742/1744/1762/1764 Smart Camera.
These specifications are typical at 25 °C, unless otherwise stated.
Power Requirements
Power consumption
NI 1722 ..................................................... 24 VDC, +20%/-15% (IEC 1311); 450 mA
NI 1742/1744/1762/1764
Direct Drive disabled........................ 24 VDC, +20%/-15% (IEC 1311); 450 mA
Direct Drive enabled......................... 24 VDC, +20%/-15% (IEC 1311); 800 mA
Reverse polarity protection............................... Yes
Memory
SDRAM ............................................................ 128 MB
Nonvolatile program/data memory................... 128 MB
Image/data storage ............................................ Unlimited using FTP or an Ethernet hard drive
Processor
NI 1722 ............................................................. Freescale PowerQUICC II Pro 400 MHz
NI 1742/1744 .................................................... Freescale PowerQUICC II Pro 533 MHz
NI 1762/1764 .................................................... Freescale PowerQUICC II Pro 533 MHz and
Texas Instruments DSP 720 MHz
VGA Sensor (NI 1722/1742/1762 Only)
Sensor ............................................................... Sony CCD ICX424AL
Active pixels (VGA)
Full scan.................................................... 640 × 480
1/2 scan ..................................................... 640 × 240
1/4 scan ..................................................... 640 × 120
Binning (1 × 2) ......................................... 640 × 240
Pixel size........................................................... 7.4
μ
m × 7.4
μ
m
Summary of Contents for ISC-1762
Page 1: ...ISC 1762...
