©
National Instruments Corporation
A-1
A
Specifications
This appendix lists the specifications of the PCI-1428. These specifications
are typical at 25 °C, unless otherwise stated.
External Connections
Trigger sense .......................................... TTL
Trigger level ........................................... Programmable (rising or falling)
Pixel clock.............................................. Camera Link compatible
Enables ................................................... Camera Link compatible
Control signal ......................................... Camera Link compatible
Video data .............................................. Camera Link compatible
Clocks
Pixel clock frequency range ................... 20 to 50 MHz
Note
Camera Link cameras must transmit at a minimum of 20 MHz.
1
PCI Interface
PCI initiator (master) capability............. Supported
PCI target (slave) capability................... Supported
Data path ................................................ 32 bits
Card type ................................................ 32-bit half-size card
Parity generation/checking,
error reporting ........................................ Supported
1
This value corresponds to the post-serialization Camera Link cable transmission rate of 140 to 350 MHz.
