National Instruments IC-3173 User Manual Download Page 1

Page: 1 / 32

USER MANUAL

IC-3173

Industrial Controller with Reconfigurable I/O

This document contains detailed electrical and mechanical information for the National
Instruments IC-3173.

Contents

About the IC-3173.................................................................................................................... 1
Hardware Overview.................................................................................................................. 2

Mounting the IC-3173.............................................................................................................19

Securing the IC-3173 to a Mount....................................................................................22
Clearance Requirements................................................................................................. 24

Software Options.....................................................................................................................25
BIOS Configuration and System Recovery............................................................................ 25

Where to Go Next................................................................................................................... 31

Resources for LabVIEW Users.......................................................................................31
Resources for Vision Builder AI Users...........................................................................32

About the IC-3173

The IC-3173 is a high-performance, small, fanless embedded computer designed for rugged
industrial applications. The IC-3173 also provides multiple digital input/output (I/O) options
for communicating with external devices.

Summary of Contents for IC-3173

































Search results

Summary of Contents for IC-3173

Reviews:

Related manuals for IC-3173

Brands by name

Popular brands

National Instruments IC-3173, User Manual

Search results

Summary of Contents for IC-3173

Reviews:

Related manuals for IC-3173

Brands by name

Popular brands