5.
Select the bootable USB flash drive or the DVD drive.
6.
Press any key to boot from the recovery media.
7.
Follow the on-screen instructions to format the hard drive and install the operating
system.
After restoring the operating system, reinstall any software and drivers onto the IC-3120.
Mounting the IC-3120
This section provides information for creating a custom mount for the IC-3120. If you do not
want to create a custom mount, a panel and DIN rail mount kit for the IC-3120 is available
from National Instruments (part number 781740-01).
Caution
If you choose not to mount the IC-3120 on a DIN rail or flat surface, do
not position the IC-3120 with the heat sinks resting on any surface. Doing so may
cause the IC-3120 device to overheat. Refer to the
IC-3120 Specifications
for
temperature specifications.
The following figures provide dimensional drawings and clearance information for the
IC-3120.
IC-3120 User Manual
|
© National Instruments
|
27
