National Instruments Graphical User Interface Ultiboard User Manual Download Page 244

Page: 244 / 281

Appendix A

Menus and Commands

National Instruments Corporation

A-3

NI Ultiboard User Manual

File»Print Setup

Sets up the printing paramaters required to print the Ultiboard design file.
Refer to the

Printing your Design

section of Chapter 8,

Preparing for

Manufacturing/Assembly

, for more information. This is found in the

3D view

only.

File»Print Preview

Lets you preview the design file before printing. Refer to the

Printing your

Design

section of Chapter 8,

Preparing for Manufacturing/Assembly

, for

more information. This is found in the

3D view

only.

File»Print

Prints the Ultiboard design file. Refer to the

Printing your Design

section

of Chapter 8,

Preparing for Manufacturing/Assembly

, for more

information.

File»Recent Designs

Displays a list of the most-recently-opened projects. Click on the desired
item in the list to open it.

File»Exit

Exits Ultiboard. You are prompted to save any unsaved design files and/or
projects.

Edit Menu

The subjects in this section describe the commands found in the

Edit

menu.

Edit»Undo

Undoes your most recent action (for example, undoes the last part move).
The command name changes to reflect what will be undone.

Edit»Redo

Redoes your most recent “undo” action. The command name changes to
reflect what will be redone.

Summary of Contents for Graphical User Interface Ultiboard


























































































































































































































































































Search results

Summary of Contents for Graphical User Interface Ultiboard

Reviews:

Related manuals for Graphical User Interface Ultiboard

Brands by name

Popular brands

National Instruments Graphical User Interface Ultiboard, User Manual

Search results

Summary of Contents for Graphical User Interface Ultiboard

Reviews:

Related manuals for Graphical User Interface Ultiboard

Brands by name

Popular brands