Chapter 3
Local Command Set
3-26
ni.com
DCSystem?
Purpose
Determine if the system is a DC system. A system is DC if it has at least one DC device.
Query Syntax
DCSystem?
Response
Program response:
1
<CRLF>
if it is a DC system, or
0
<CRLF>
if it is not a DC system, or if it is no longer dynamically configurable because the
Begin
Normal Operation
command has already been sent to the top-level Commanders through
the
DCBNOSend
local command.
Console response:
This IS a Dynamic Configured system.
<CRLF>
if it is a DC system, or
This is NOT a Dynamic Configured system.
<CRLF>
if it is not a DC system.
