National Instruments FlexRIO NI-7931R, User Manual

Page: 30 / 74

© National Instruments
|
3-11
NI-793xR User Manual
Clocking Architecture
The NI-7932R device includes dedicated clocking hardware to provide a flexible clocking
solution for your FlexRIO system. Refer to Chapter 4,
Developing with LabVIEW FPGA , for
information about configuring clocks with LabVIEW FPGA.
The NI-7932R clocking architecture includes the following clocks:
• 10 MHz Reference Clock
• 40 MHz Onboard Clock (default)
• 100 MHz Clock
• 156.25 MHz Clock/312.5 MHz MGT Clock
1
• 200 MHz Clock
• DRAM Clock
The following figure illustrates the clocking circuitry on the NI-7932R.
Figure 3-10.
NI-7932R Clocking Diagram
1
This clock is user-selectable for either 156.25 MHz or 312.5 MHz.
Memory
Controller
PLL
40 MHz
100 MHz
100
MHz
10 MHz
Reference Clock Kintex-7 FPGA
200 MHz
DRAM
Clock
166 MHz
MGT
O s cill a tor
MGT
Ref
Clk
156.25 MHz/
3 12.5 MHz
Fre qu ency
S elect
Ad a pter
Mod u le
PLL
100 MHz
O s cill a tor
REF IN
Ref Clk En ab le
IoMod S yncClock