Chapter 4
Serial Port Configuration
©
National Instruments Corporation
4-5
ENET-232 and ENET-485 Series User Manual
Figure 4-5.
General Port Settings Window
Note
The FIFO settings for serial device servers are optimized for network performance,
and cannot be adjusted.
COM Port Number
Use the
COM Port Number
control to change the logical COM
x
name
of the selected port.
Transceiver Mode
Use the
Transceiver Mode
list box to change the transceiver mode.
This mode applies only to ENET-485 serial device servers. For more
information about transceiver modes, refer to Chapter 6,
.
