![background image](http://html.mh-extra.com/html/national-instruments/ecuts-16000/ecuts-16000_user-manual_710199046.webp)
ECUTS-16001 Environmental, Physical, and Interface Requirements
Ventilation
Interface
Environment
Physical
Ensure the location has stable
environmental conditions to reduce
variability in performance.
Ambient Temperature
5 °C to 40 °C (41 °F to 104 °F)
Relative Humidity
20% to 80%, noncondensing
Pollution Degree
2
Indoor use only.
Ensure the facility has cooling capacity
in excess of the maximum power
consumption of the ECUTS.
Ensure the location can accommodate
the size and weight of the ECUTS.
Test Rack Dimensions
584 mm x 884 mm x 2,068 mm
(23 in. x 34.8 in. x 84.1 in.)
Depth Including Optional 9025TR
Platform
1,356 mm (53.4 in.)
Maximum Weight
275 kg (606 lb)
Do not obstruct the required
clearances to ensure proper air flow.
Obstruction thresholds are measured
from the test rack exterior.
Top
760 mm (30 in.)
Back
300 mm (12 in.)
Provide AC power connection to
facility power source.
Voltage
200 VAC to 240 VAC, single phase
Maximum Current
24 A
Frequency
50/60 Hz
Maximum Branch Circuit
32 A
AC Inlet Type
IEC 60309 2P+E 6H 32 A
(Optional) Provide connection to
facility protective earth ground.
(Optional) Provide a clean, dry
compressed air connection.
Pneumatic Air Pressure Rating
100 PSI maximum
Provide network connection.
7
4
5
1
6
3
2
1
2
3
4
5
6
7
Ventilation Clearances
The following clearances are required to ensure proper airflow to the ECUTS. Clearances are measured from the ECUTS test rack exterior and
do not include the 9025TR platform or monitor arm. Ensure obstructions do not violate the following clearance requirements:
•
Top: 760 mm (30 in.)
•
Front and Back: 300 mm (12 in.)
Caution
You must follow the ECUTS power dissipation and ventilation requirements to avoid thermal hazards.
Attention
Vous devez suivre les exigences de ventilation et de dissipation de puissance du ECUTS pour éviter tout risque
thermique.
Getting Started
Receiving the ECUTS
When the ECUTS shipping crate arrives at the facility, store the crate indoors in an area that meets the following conditions.
ECUTS-16000/16001 User Manual
|
© National Instruments Corporation
|
45