Index
I-2
©
National Instruments Corporation
DATA signal
description (table), 3-12
mode 1 input timing (figure), 3-13
mode 1 output timing (figure), 3-14
mode 2 bidirectional timing (figure), 3-15
digital I/O
questions and answers, C-2
specifications, A-1 to A-2
digital I/O connector
description, 4-3
signal connections, 3-7
digital I/O lines, connecting power to, 3-8
digital I/O state selection, 3-9 to 3-11
floating DIO state, 3-11
high DIO state, 3-9 to 3-10
low DIO state, 3-10 to 3-11
documentation
conventions used in manual, x
National Instruments documentation, xi
organization of manual, ix-x
related documentation, xii
DPA<7..0> signal (table), 3-3
DPB<7..0> signal (table), 3-3
DPC<7..0> signal (table), 3-3
E
e-mail support, D-2
electronic support services, D-1 to D-2
environment specifications, A-2
equipment, optional, 1-5 to 1-6
custom cabling, 1-6
exceeding maximum ratings (note), 3-1
F
fax and telephone support numbers, D-2
Fax-on-Demand support, D-2
floating DIO state, 3-11
FTP support, D-1
fuse, self-resetting, 3-8
G
GND signal (table), 3-3
H
hardware installation, 2-1 to 2-4
BP-1 battery pack (note), 2-2
LED patterns for DAQPad-6507/6508
states (table), 2-3
power connections (figure), 2-2
resistors for polarity selection (note), 2-3
sequence of instructions for proper
operation (note), 2-1
steps for, 2-2
upstream and downstream connections
(figure), 2-4
high DIO state, 3-9 to 3-10
I
I/O connector pin descriptions
pin assignments (figure), 3-2
Port C pin assignments, 3-4
signal connection descriptions (table), 3-3
IBF signal
description (table), 3-12
mode 1 input timing (figure), 3-13
mode 2 bidirectional timing (figure), 3-15
installation. See also configuration.
common questions, C-1 to C-2
hardware, 2-1 to 2-4
software, 2-1
unpacking DAQPad-6507/6508
devices, 1-6
interrupt control circuitry, 4-2
INTR signal
description (table), 3-12
mode 1 input timing (figure), 3-13
mode 1 output timing (figure), 3-14
mode 2 bidirectional timing (figure), 3-15
