Chapter 9
SC-2057
9-6
©
National Instruments Corporation
Figure 9-5.
Output Connections with the SC-2061/2, ER-8,
or 8-Channel SSR Backplane
* The VXI-DIO-128 supplies 1 A of current. If the combination of boards
or SSR modules attached to the SC-2052 adapters require more than 1 A,
use an external power supply. Set the power source switch on these boards
to external. The board current requirements are as follows: SC-2061:
130 mA, SC-2062: 630 mA, and ER-8: 500 mA. The current
requirements for the SSR modules are as follows: SSR-OAC-5: 18 mA,
SSR-OAC-5A: 19 mA, and SSR-ODC-5: 16 mA.
VXI-DIO-128
OUTPUT
SC-2057
SH96-96
SC-2052
SC-2052
SC-2061 *
SC-2062 *
ER-8 *
SSR Series
(8 channel)
J5 or J6
+5 V Supply
NB1
J2 Ports12–15
J1 Ports 8–11
SC-2061 *
SC-2062 *
ER- 8*
SSR Series
(8 channel)
SC-2061 *
SC-2062 *
ER-8 *
SSR Series
(8 channel)
SC-2061 *
SC-2062 *
ER-8 *
SSR Series
(8 channel)
SC-2061 *
SC-2062 *
ER- 8*
SSR Series
(8 channel)
SC-2061 *
SC-2062 *
ER-8 *
SSR Series
(8 channel)
SC-2061 *
SC-2062 *
ER-8 *
SSR Series
(8 channel)
SC-2061 *
SC-2062 *
ER-8 *
SSR Series
(8 channel)
NB7
(NB8 for SSR Series)
Port 15
Port 14
Port 13
Port 12
Port 10
Port 11
Port 9
Port 8
