manualshive.com logo in svg

National Instruments cRIO-9032, User Manual, Page: 31 / 42

Share
Download
National Instruments cRIO-9032 User Manual Download Page 31

Mounting the Device on a Panel

You can use the NI panel mounting kit to mount the cRIO-9032 on a panel.

What to Use

•

cRIO-9032

•

Screwdriver, Phillips #2

•

NI panel mounting kit, 157253-01
–

Panel mounting plate

–

M4 x 10 screw (x4)

What to Do

Complete the following steps to mount the cRIO-9032 on a panel.

1

3

2

1.

Align the cRIO-9032 and the panel mounting plate.

2.

Fasten the panel mounting plate to the cRIO-9032 using the screwdriver and M4 x 10
screws. NI provides these screws with the panel mounting kit. Tighten the screws to a
maximum torque of 1.3 N · m (11.5 lb · in.).

Note

 

You must use the screws provided with the NI panel mounting kit

because they are the correct depth and thread for the panel mounting plate.

3.

Fasten the panel mounting plate to the surface using the screwdriver and screws that are
appropriate for the surface. The maximum screw size is M5 or number 10.

Panel Mounting Dimensions

The following figure shows the panel mounting dimensions for the cRIO-9032.

NI cRIO-9032 User Manual

  | 

© National Instruments

  | 

31

Summary of Contents for cRIO-9032











































Reviews:

No comments