![background image](http://html1.mh-extra.com/html/national-instruments/cp400x/cp400x_getting-started-manual_3633303004.webp)
Other Equipment
There are several required items not included in your device kit that you need to operate the
PXIe-5163. Your application may require additional items not included in your kit to install or
operate your device.
Required Items
•
A PXI Express chassis and chassis documentation
•
A PXI Controller or PC with a Device for PXI Remote Control system that meets the
system requirements specified in this guide and chassis documentation
Optional Items
•
PXI Slot Blocker Kit, 5 slot blockers (NI part number 199198-01)
•
PXI Filler Panel Kit, 17 filler panels (NI part number 778646-01)
•
BNC-to-BNC cable, 50 Ω, 1 m (NI part number 781887-01)
•
AUX 0 connectivity:
–
SCB-19 noise rejecting, shielded AUX 0 connector block (NI part number
783959-01)
–
SHH19-MH19-AUX shielded single-ended cable, 1 m (NI part number 784091-01)
–
Mini-HDMI Breakout Cable to 6 BNC, 6 in. (NI part number 786979-01)
•
Oscilloscope probe compensator, SMB (NI part number 786983-01)
•
Probes—refer to the following table for several options compatible with the PXIe-5163.
Table 1.
Probe Options for the PXIe-5163
Model
NI Part Number
Description
CP400X
784254-01
400 MHz, 2 m, 10X cable divider probe
CP500X
784253-01
500 MHz, 1.2 m, 10X cable divider probe
NI 5191
781785-01
800 MHz differential active probe
SA1000X
784255-01
1 GHz single-ended active probe
SA1500X
784256-01
1.5 GHz single-ended active probe
SA2500X
784257-01
2.5 GHz single-ended active probe
SP500C
783630-01
100x passive probe, 500 MHz
SP500X
783629-01
10x passive probe, 500 MHz
CC0550X
786846-01
5 A RMS, 50 MHz current probe
CC05120X
786847-01
5 A RMS, 120 MHz current probe
PXIe-5163 Getting Started Guide
|
© National Instruments
|
3
Summary of Contents for CP400X
Page 1: ...CP400X ...