National Instruments cDAQ-9188XT, User Manual, Page: 12 / 114

© National Instruments | 1-3
NI cDAQ-9188XT User Manual
Unpacking
The cDAQ chassis ships in an antistatic package to prevent electrostatic discharge (ESD). ESD
can damage several components on the device.
Caution
Never
touch the exposed pins of connectors.
To avoid ESD damage in handling the chassis, take the following precautions:
•
Ground yourself with a grounding strap or by touching a grounded object.
• Touch the antistatic package to a metal part of your computer chassis before removing the
chassis from the package.
Remove the chassis from the package and inspect it for loose components or any other signs of
damage. Notify NI if the device appears damaged in any way. Do
not
install a damaged chassis.
Store the chassis in the antistatic package when the chassis is not in use.
Hardware Symbol Definitions
The following symbols are marked on your cDAQ chassis.
Caution
When this symbol is marked on a product, refer to the
Safety Guidelines
section for information about precautions to take.
ESD
When this symbol is marked on a product, the product could be damaged if
subjected to Electrostatic Discharge (ESD) on the connector pins of any I/O port.
To prevent damage, industry-standard ESD prevention measures must be employed
during installation, maintenance, and operation.
EU Customers
At the end of the product life cycle, all products
must
be sent to
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
ni.com/environment/
weee
.
⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ ˄Ё೑ ˅
Ё೑ᅶ᠋
National Instruments
ヺড়Ё೑⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ
(RoHS)
DŽ݇Ѣ
National Instruments
Ё೑
RoHS
ড়㾘ᗻֵᙃˈ䇋ⱏᔩ
ni.com/
environment/rohs_china
DŽ
(For information about China RoHS compliance,
go to
ni.com/environment/rohs_china
.)